Member Reviews for Baron Custom Accessories Air Injection Removal Kit - Road Star/V-Star 1100

Important: SEE FITMENT DETAILS!

Related Searches:

jet kits, fuel injection, K&N air filters, air kits

Write a review and share your experience with other members.

Average Customer Review: 4.62 (based on 286 reviews)

Breakdown:
127 Reviews
33 Reviews
11 Reviews
1 Review

Sort By: Newest Oldest Highest Rated Lowest Rated Helpful Reviews

(4 stars) reviewed on 10/06/12 by lizzard wilson (lizzardlongone) from mount gambier, SA, AU, for a green on green 1999 1600/1700 Road Star wrote: i have installed this product and it was easy as to do the job the hardest part was getting all the bullshit anti pollusion crap off the bike it has defantly given me more power and reduced the back fireing a huge load , but my bike has never been the same since i got it back from the recall . Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 01/02/12 by Paul Martin (thorold) from Ingersoll, ON, Canada, for a 2003 mocha brown, hypercharger. lower rea kit, V/H 1600/1700 Road Star wrote: makes the bike look clean Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 11/14/08 by Jim (mrfurious) from Delphos, OH, United States, for a 2000 1600/1700 Road Star wrote: Install was a little tricky, but worked out in the end. Recommend you have at least a 18" pry bar and a 3-lb sledge hammer to drive out the elbow fittings and get the plugs fully seated. Really cleans up the looks of the front and left side of the engine. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 10/12/08 by cono conlon (cono1600) from logan, , for a 2003 metalic brown 1600/1700 Road Star wrote: a real lesson in less is more Review Details  0 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 08/05/08 by Todd Cherry (tscherry) from Fort Worth, TX, United States, for a 2008 1600/1700 Road Star wrote: Works great, no more popping. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 06/27/08 by Lance (jersey_knight) from , NJ, United States, for a 2001 1600/1700 Road Star wrote: cleaned up the bike nice got rid of all the tubing and smog garbage Review Details  0 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 06/21/08 by rudy anderson (toosons) from missouri city, TX, United States, for a 2007 1600/1700 Road Star wrote: nice to remove some unwanted clutter Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 05/12/08 by Rick Chorney (rchorney) from Calgary, AB, Canada, for a 2006 1600/1700 Road Star wrote: cleans up the engine area, love it!!! Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 04/16/08 by Bob (Beauty) from Gaffney, SC, for a 2002 Black Midnight Star 1600/1700 Road Star wrote: Sure cleaned up the motor Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 04/03/08 by Big D Earl (earldj) from Hooper, UT, United States, for a 2000 1600/1700 Road Star wrote: Makes the bike look cleaner. It also eliminated the backfire. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 03/20/08 by (ausbike) from Mt Isa, , Asia, for a 2004, Purple & Dark Purple 1600/1700 Road Star wrote: I have removed the AIS clutter and have blocked off the elbows into the heads to see if their would be any adverse affects, and so far all is well. I am now confidant in purchacing this item with all the possitive comments. Will try using some of that freezing spray for rusted bolts to help loosen the elbows Review Details  Was this review helpful to you? Yes No

(3 stars) reviewed on 10/27/07 by Arjan (arjanschenke) from Holland, , Americas, for a 1999 1600/1700 Road Star wrote: Looks good. A must for every roadstar rider. It took a while to remove the two elbows out of the cilinders. Used a long piece of wood and a hammer from the other side to get them out. The tip to put the two new fillings in the freezer for 24 hour before installing was a good idea. Went in easy. No change in performance. Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 07/31/07 by G-man Gagnon (graygagnon) from Dale City, VA, United States, for a 2003 Midnight 1600/1700 Road Star wrote: came on bike Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 07/24/07 by Drifty Peacock (Deth666) from Mishawaka, IN, United States, for a 2002 AGV Blue 1600/1700 Road Star wrote: Easy to install. works great. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 07/18/07 by Tracey (titanup) from Bellevue, NE, United States, for a 2007 Candy Apple Red & Blk Cherry 1600/1700 Road Star wrote: Just installed it and what a huge difference it makes on the look of the bike. If it is going to clean up that much on the bike, then they should not install it. Kind of a waste of parts. Well worth doing. A must for a clean looking bike. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 07/10/07 by Kim Rawlings (KDRawlings) from Trabuco Canyon, CA, United States, for a 2000 1600/1700 Road Star wrote: just installed.Cleans up the look. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 06/28/07 by Zlatko Reder (Skyman) from Belgrade, Serbia, , for a 2003 1600/1700 Road Star wrote: Ohhh, me God what I did! Removed AIS! Global warming! Naughty, naughty, naughty! Yeah, I did it and roadie is purring sweetly! No clattering, no noise, absolutely fantastic! Although very simple task, pulling the elbows is not as easy as it looks when you read few instructions on the net. I used refrigerant R22 gas (if you even mention this in Europe, they'll arrest you, here in UAE nobody cares) to freeze the elbows a bit and then yank them left-right with supplied drift extension, (fits perfectly in the elbow), up-down with a hammer – cautious advised – you are dealing with aluminium alloy cast cylinder! Then slowly out with Vise-Grips! Then I placed the plugs in the holes as far as possible by hand and only then knocked them in with a hammer over supplied drift – again cautious! I kept the plugs in small plastic cups with water and froze them overnight. It helps. When the rest of AIS was removed I plugged the vacuum hose with a golf tee and pushed it under the tank. No need to rem... Review Details  4 out of 5 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 05/17/07 by Kyz (batkyz) from Ajax, ON, Canada, for a 2003 Silver Limited Edition 1600/1700 Road Star wrote: Cleans up the front end of alot of garbage. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 03/15/07 by jeff edmond (jefat101) from whitehouse, TN, United States, for a 2004 raven\wineberry 1600/1700 Road Star wrote: must have to remove air injection Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 03/12/07 by Eric (ejb919) from Cary, NC, United States, for a 2001 Midnight 1600/1700 Road Star wrote: Definitely like how this cleans up the area around the engine, and it does seem to have reduced the backfiring. Review Details  Was this review helpful to you? Yes No