Member Reviews for Baron Custom Accessories Big Air Kit, Enferno - Kawasaki Vulcan 1500/1600 (EFI)

Important: SEE FITMENT DETAILS!

Related Searches:

jet kits, fuel injection, K&N air filters, air kits

Write a review and share your experience with other members.

Average Customer Review: 4.43 (based on 14 reviews)

Breakdown:
9 Reviews
3 Reviews
1 Review
1 Review

Sort By: Newest Oldest Highest Rated Lowest Rated Helpful Reviews

(5 stars) reviewed on 06/09/12 by Adam Palmer (adampalmer) from HUTCHINSON, KS, United States, for a 2002 1500 Vulcan Mean Streak wrote: First I believe the reed block off covers come with this purchase so don't purchase extra. I now have two sets. The instructions are useful but not great. I am a novice when it comes to motorcycle mechanics but I actually fairly easily installed the reed block of covers and the big air kit. The manufactures instructions really aren't that great but will be useful. Also, having a service manual and using Gadget's website will be helpful. The wires to the solenoids well not be used to you can cut them. The plastic piece that bridges between the air filter covers is the most difficult part of the install. A dremel will be useful and make sure you have threadlocker on hand. This cleaned up the bike and just looks damn good. I do not regret this purchase. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 03/03/11 by Bigal Paine (Bigal99) from Lincoln, NE, United States, for a 2001 1500 Vulcan Classic Fi wrote: all i can say is WOW. LOOKS, RUN'S & SOUNDS GOOD. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 05/25/10 by BarryT (FreeBear) from Morse, SK, Canada, for a 2005 Black 1500 Vulcan Classic Fi wrote: This is a very heavy piece of billet. Looks great on the bike and I'm impressed with the performance. Not sure on hp gains or torque, but it sure feels like there is more. Not too bad to install. Cross over tube was the most time consuming but with the use of a dremel, it came out. Baron's instruction aren't great, but with the use of my shop manual and Gadget's Fix It page, it was a snap. Took more time to take the OEM stuff off than to install the BAK. Remapped the PCIII and was set to go. Bike fired right up. Seems to run a lot smoother now. I had already installed the Reed Valve block off plates previously, so did not need the ones that came with this kit. Nice of them to include them though. BTW, I didn't rush with this install. Took my time and spent an entire day to do it. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 03/25/10 by KRUGER13 HENSLEY (freddie62h) from Parts Unknown, FL, United States, for a 2005 CUSTOM PAINT,EL DIABLO AZULE 2000 Vulcan wrote: I bought this cover extra to change every now and then. Review Details  Was this review helpful to you? Yes No

(3 stars) reviewed on 03/04/10 by (bunner) from , , for a 1500 Vulcan Mean Streak wrote: Seems to be working well with Pipes and Commander... Seems a little tarnished. Going to see if I can find something to clean it up. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 01/02/10 by Doug Torres (jruffy) from honolulu, HI, United States, for a 2003 1600 Vulcan Classic wrote: good quality product,instructions not that great but gadgets web site is a huge help.yhe crossover tube comes out easy with a dremel and a pair of snips.i really like the look of the air cleaner performance is better but plan on using the choke for cold starts.install was pretty easy. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 04/11/09 by TJ (defendr200) from reisterstown, MD, United States, for a 2006 blue/silver 1600 Vulcan Classic wrote: The crossover tube is a little hard to get out but besides that the product went on very easy. The only thing I don't like is that I can now hear the intake sucking in air. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 03/23/07 by Gary (gbrittain) from Prineville, OR, United States, for a 2003 1500 Vulcan Mean Streak wrote: Easy install, but as everyone says getting the cross-over pipe was the hardest part of it. A Dremel tool did the trick in short order. The insructions were good but not as complete as others I have seen. Good quality. Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 11/13/06 by jake (nekras) from SAN ANTONIO, TX, United States, for a 2006 black 1600 Vulcan Mean Streak wrote: looks very nice with this air cleaner V H bigshots and powercomander got 15 more hp 20lbs more torque on the dyno mostly from the air cleaner great product Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 09/25/06 by Steven Sudler (sudkawa) from Upper Marlboro, MD, United States, for a 2008, Black, Hyper Charger, Beatle Bags, Freedom 1600 Vulcan Classic wrote: Wow what a product Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 04/23/06 by Brian (stockwell20) from Greenwood, IN, United States, for a 2008 1600 Vulcan Classic wrote: I think this product should have been listed under "Chrome Accessories" instead of "Performance Parts". I'm not disappointed in the added performance of my bike now that I have installed the BAK, but it wasn't all that I was hoping for. You will get a boost, but it won't turn your bike into greased lightening. The chrome finish on the cover could be better. After awhile, the chrome finish begins to "smudge" and it doesn't reflect like it did when it was new. Installation took me about 5 hours. You will have to remove your tank, but that's not very difficult. I just unhooked the two small black hoses under the right side of the tank and then flipped the tank over to the left, leaving much of the other components still attached. If you do this, you don't have to drain the tank or worry about unhooking all that other crap. As plenty of other people have stated, the worst part is removing the cross-over duct. It's not hard, just frustrating trying to cut all of that plastic out of there. ... Review Details  6 out of 6 members found this review helpful. Was this review helpful to you? Yes No

(2 stars) reviewed on 03/10/06 by barrski (barryinn) from Denham Springs, LA, United States, for a 2003 Black Pearl 1500 Vulcan Nomad Fi wrote: Great Looking on my Vulcan!!! I really like the look, and it's cool!! , but what a job to install !!!!!. It could be a lot easier if Baron would provide better instructions and maybe some closeup photo's? It took me 6 hours to install and then I called Baron to get some help, but, they had no tech available because one tech went to Daytona and the other went to a funeral, so I would have to wait until Monday or keep trying to figure it out. I couldn't wait, there instructions are not the best, I sure hope it runs ok considering the price. We will see tomorrow when I get the tank back on. I will do an update Monday 3/13/06. Well, I finished installing the Big Air Kit and took it for a spin, I am not sure at this point if it was worth the money or not. TAKE SOME ADVICE..DON'T SPEND THE MONEY...I spent $800.00 for nothing but looks. I can't believe that Cruiser Customizing edied my summary, they removed the negative important information that people needed to know. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 01/06/05 by Z man (wziz52) from Seattle, WA, United States, for a 2003 1600 Vulcan Classic wrote: Highly recommended, everything fit, hardest part is removing the crass-over duct, which can be easily cut down in the middle with a piece of sanding string from the woodworker store. Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 01/28/04 by Ray (westcoast) from Maple Ridge, BC, Canada, for a 1600 Vulcan Classic wrote: Looks great. I haven`t installed it yet and will review then. Installed at the beginning of april and it looks great on the bike. I only had one problem when installing one of the standoff post stripped right of the bat. I got Barons to send me a replacement so all is well. Review Details  2 out of 7 members found this review helpful. Was this review helpful to you? Yes No