Member Reviews for Cobra Standard Sissybar - Suzuki 800 Inruder Volusia/ C50 and M50 Boulevard Models (01- 09)

Important: SEE FITMENT DETAILS!


View installation guide

All Cobra products are made in the USA

Related Searches:

sissybar bags

Write a review and share your experience with other members.

Average Customer Review: 4.47 (based on 101 reviews)

Breakdown:
16 Reviews
20 Reviews
1 Review
2 Reviews

Sort By: Newest Oldest Highest Rated Lowest Rated Helpful Reviews

(4 stars) reviewed on 05/05/09 by Aplg8 (chappleg) from Raleigh, NC, United States, for a 2002 800 Intruder Volusia wrote: Easy to install... once you have the proper bolts. With my K-Drive saddlebag mounts I already had 90mm bolts, so this required me to get 100mm bolts. You WILL NOT find these at your local hardware store. Tried several bike shops before ordering from www.boltdepot.com - after shipping and taxes I paid about $19 for four 8mm X 1.25 X 100mm socket head screws. So after I had the proper bolts the install was a breeze. For best results, loosely attach the side mounts to the bike and then attach the backrest to the mounts before tightening down the side mounts. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 04/02/08 by Casey Zafke (kc2946) from White Bear Lake, MN, United States, for a 2004 800 Intruder Volusia wrote: It's a very solid piece, easy to install, i Really like the look, sits in a really good position for your passanger; lower mid back. it's the same material as your stock seat , I have the MC enterprises saddle bag guards, and the rear screw that comes with the guard is to short and you will have to by one from your local hardware store. It cost me 6 dollars for two 80mm chrome bolt and it worked great. Review Details  3 out of 3 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 06/10/07 by Ron (deathwish) from , , United States, for a 2001 800 Intruder Volusia wrote: INSTALLED QUICKLY AND PASSENGERS LOVE TO RIDE NOW Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 01/08/07 by Michael Noble (strangiato) from San Jose, CA, United States, for a 2001 800 Intruder Volusia wrote: Look good and an easy install Needs longer bolts if you have saddlebag stays like i have Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 06/11/06 by JP (jiparsons) from Troy, NY, United States, for a 2004 800 Intruder Volusia wrote: A little tricky to install, especially since I had the Cobra saddlebag supports. Cobra should provide a set of longer bolts for the supports. However, I left out the spacer for the front of the sissy bar brackets and put the skinny one on the rear. I had some trouble getting the bolt holes to line up as others have noted in their reviews. With a little elbow grease and some select technical phrases the bolts finally caught and I was in business. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 04/26/06 by Lewis (LMVolusia) from Auburn, AL, United States, for a 2002 Navy Blue Metalic 800 Intruder Volusia wrote: My wife had back surgery so I added the high sissy bar to give her the extra support. Lining up the bolts and getting them started was a little difficult, however installation was completed in just over 30 minutes. When I go on a solo trip, my bag easily attaches to the bar and adds some additional back support. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 08/02/05 by Ed (steelers) from syracuse, NY, United States, for a 2004 800 Intruder Volusia wrote: not to bad to put on but it looks real nice Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 06/19/05 by slacklu101 (slacklu101) from Burien, WA, United States, for a 2004 800 Intruder Volusia wrote: a must fo rthe rear rack!!!!! passengers don't mind it either Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 05/27/05 by Jim (VolKroozer) from St. Louis, MO, United States, for a 2003 green/silver 800 Intruder Volusia wrote: Just received my backrest and luggage rack last week and installed them today. The pad covering is nearly a match of the seat, as if it came from Suzuki itself. The only problem I had was the mounting bolts were 65mm long, too short with the saddlebag guards, which is why I gave it 4 stars for overall rating. The 75mm bolts that came with the Suzuki guards were a smidge short of being long enough. I searched locally for a day and a half for 80mm bolts and finally found some at an industrial supply company.(Check your yellow pages under Bolts and Nuts) They have the allen cap head instead of the button head, but they are zinc plated so they match pretty well. You may not find that size at any local hardware store, I went to them all. I did find them online at BoltDepot.com. I sent Cobra an email about the bolts and when I receive a response, I will make note of it here. Had no problems with installing the luggage rack, but a third hand would be helpful. Update: I have not... Review Details  6 out of 6 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 11/18/04 by DAVID STOKLEY (CRUISERBOY) from RIEGELWOOD, NC, United States, for a 2004 800 Intruder Volusia wrote: cobra tall sissybar she loves it. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 08/24/04 by Ken Scheiderer (kts3) from Aynor, SC, United States, for a 2003 Black 800 Intruder Volusia wrote: My wife said I had to get a Sissy bar for her and she was thoroughly pleased eith this one. The pad almost matches the stock seat. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 05/13/04 by John (jcost2) from lexington, KY, United States, for a 2004 800 Intruder Volusia wrote: good purchase. I bought it at the dealer, I put it on. easy. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 12/07/03 by Jeff (bobo38) from Watertown, NY, United States, for a 800 Intruder Volusia wrote: Cobra has excellent chroming. Installed easily and all the bolt hole lined up. My only complaint is the exposed welds on the rear of the cushion where it bolts to the bar. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 09/01/03 by extremizme (mmiller5) from Raleigh, NC, United States, for a 800 Intruder Volusia wrote: Installed it so I would feel safer riding with a passenger. Looks good. Will probably take it off when I get one piece gel seat Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 04/23/03 by Tami (legal_goddess) from Ocoee, FL, United States, for a 2002 Custom Pink 800 Intruder Volusia wrote: Very handy. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 03/20/03 by scott (scottmu) from marysville, OH, United States, for a 800 Intruder Volusia wrote: I bought the mini backrest.Looks great.My wife says it should have been the next size up for better support. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 02/19/03 by Sterling B (Silver722) from San Marcos, TX, United States, for a 800 Intruder Volusia wrote: I love it. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 11/29/02 by Lee (Lee_Roy_Boy) from Puyallup, WA, United States, for a 800 Intruder Volusia wrote: It works fine. Installation was easy, and no one has fallen off the back since putting it on. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 09/27/02 by Woofy (Woofy) from Seattle, WA, United States, for a 800 Intruder Volusia wrote: Beautiful fit and finish. The back of the pad is finished in attractive, padded vinyl as well. The chrome finish is gorgeous and the metal parts are heavy and obviously strong and durable. My only nit pics are that the screws supplied don't have the same beauiful chrome finish as the brackets do, making them look more than a little cheesy. Other nit pick was that the directions don't mention using lock-tite when installing the new bolts, which I would have done anyway, but newbie installers might overlook. Installation was a breeze thanks the reading about the difficulties other members experienced regarding installation where the frame and rear fender become misaligned requiring tremendous effort and two people to fix. This same frustrating thing happens when anyone removes the same two bolts to install brackets for side cases for bags. Here's the trick I used: NEVER REMOVE BOTH BOLTS AT THE SAME TIME. First, remove the rearward bolt. Replace it with the bolt supplied with the b... Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 06/17/02 by Brian Schraeder (boatboy003) from Wilkes-Barre, PA, United States, for a 800 Intruder Volusia wrote: When I removed the factory bolts, the fender shifted making it very difficult to install the new bolts. It took over 2 hours of prying and cursing to get the bolts back through. There is also a slight mar in the chrome. Very dissapointing after dropping $250. Review Details  Was this review helpful to you? Yes No