Member Reviews for Custom World International Passenger Peg Relocation Kit - Volusia

Write a review and share your experience with other members.

Average Customer Review: 3.92 (based on 13 reviews)

Breakdown:
4 Reviews
6 Reviews
2 Reviews
1 Review

Sort By: Newest Oldest Highest Rated Lowest Rated Helpful Reviews

(3 stars) reviewed on 04/19/10 by Robert Mick (rmick39) from Troy, TX, United States, for a 2000 Custom Green Monster 1400 Intruder wrote: Wish it was chrome but will work for the time being, really pricey for what it is. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 08/16/09 by Aussie Watson (diverse1) from Brisbane, , Australia, for a 2002 1500 Intruder VL1500 LC wrote: These are just great, just ask the lady on the back, she's wrapped. Had to cut a little bit away on the bottom inside corner of the new extension to go over Vance & Hines Classic Pipes, and I would say the standard pipes maybe similar. Moves OEM pegs down and forward about 45 degrees about 100mm or 4" Also had to get another ignition key cut and bend it over on the top as you cannot get the key into the tool box on the left side once the peg extension is fitted. To get pegs to fold up you just need to use a 1/2" drill bit and drill into the new peg extension about 3/16" where the OEM peg hits it and paint it over with some clear nail polish to seal it. Peg folds up properly and locks into place when this is done and does not look out of place. I think that these will save the bike a little if you happen to drop the bike. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 05/10/08 by Buzz (Audguy) from Kemptville, ON, CA, for a 1999 black & silver 1500 Intruder VL1500 LC wrote: Th ewife was complaining about numbing of the knees and this with cwi floors arethe cure . You know when she's happy..... Review Details  3 out of 3 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 01/19/08 by Blackbeard (Blackbeard) from Cypress, TX, United States, for a 1998 1400 Intruder wrote: I bought a similar set of these used from a buddy, but they are CHROME and look great! My wife is only 4' 10", but really appreciates the extensions. A "must have" accessory for happy passengers! Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 08/17/07 by moe (numbskull) from caledonia, , United States, for a 2006 black c90T C90 Boulevard wrote: much more comfort for your passenger Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 08/06/07 by (freebird0175) from , , United States, for a 1998 1400 Intruder wrote: I got these along with the jadine mini floor boards. The wife really loves over the stock setup. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 03/22/07 by Artie Hamlin (SoGaRebel) from Valdosta, GA, for a 2006 C90 Boulevard wrote: Made the wife much more comfortable....had to do some adjustments to get them to fit with V&H Longshots. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 03/13/07 by BigoC90 (cliff) from Richlands, VA, United States, for a 2005 black & blue C90 Boulevard wrote: Great item ! My wife is 5'9" with long legs. The C90 has the mounts for the passenger floorboards up just a little to high. After a long all day ride ...she would stiffen up. These have made a big difference in her comfort. Made very well, but not chrome. they are alum. but look really good. If you want chrome, you can have them chromed. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 10/16/06 by Rich Silva (silva28) from Warren, RI, United States, for a 2006 C90 Boulevard wrote: Fit great on my C90T. Lowered the passenger footboards approximately four inches Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 05/18/06 by coolbreeze (wayner) from Dayton, OH, United States, for a 2002 1500 Intruder VL1500 LC wrote: I did not get these but something very similar from Waynesville Cycle Center (Grand Canyon Products). The fit was good and they look good. Much more comfortable for the wife. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(3 stars) reviewed on 05/08/06 by John Demarkis (Drummadude) from Beverly Farms, MA, United States, for a 2001 1500 Intruder VL1500 LC wrote: I just got these today and went out and put them on....With all the accessories I have on my bike...These are really the only things I think I should have returned for a refund. First the stock footpegs do not fit the extentions evenly. When you fold the pegs up the bearing hole does not line up with the bearing so it doesn't lock into position. After inspection The cause of this is a part of the peg making contact with the extention before it can fold all the way up. I ended up spray painting them Black, Filing down the part of the footpeg that was touching the extention when folded up. They seem to work fine and look much better. Oh well... PS____Way Over Priced!! Review Details  3 out of 3 members found this review helpful. Was this review helpful to you? Yes No

(1 stars) reviewed on 12/31/05 by Dave L. (C90Guy) from Artesia, CA, United States, for a 2005 C90 Boulevard wrote: Rub on Vance & Hines longshots even though they are much smaller in diameter than stock, other side would block key access to tool box. Wouldnt tighten up enough on stock mounts to keep from rattling. Took them off. JUNK Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 10/09/05 by Louis Lampron (goglu1) from Lavaltrie, QC, Canada, for a 1999 1500 Intruder VL1500 LC wrote: pasenger is more confortable Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No