First Gear TPG Rainier Jacket with d3o Technology- Men

ZOOM

d3o intelligent shock absorption in the shoulders and elbows provides superior protection. HYPERTEX PLUS waterproof and breathable outer shell material keeps rain outside but allows inside humidity to escape. Outer shell material is 100 percent 600 denier nylon for abrasion resistance. Kevlar reinforced Teramid underlay at the crucial first point of contact on the shoulders and elbows to keep your skin safe from the road.

Two 8-inch chest vents with cord locks to securely hold them open for airflow, two 9-inch sleeve cuff vents with 2-way zippers, and two 9-inch rear exhaust vents. YKK and RiRi waterproof zippers protect all exterior vents and pockets from moisture. 10 exterior pockets! Four front cargo, two chest, two front side, a key pocket on the left sleeve, plus a large rear storage with a 13-inch opening. (Left side contains a port for heated apparel power cord or headphones for your favorite listening device, and both pockets contain cord pulls to create a wind block around the bottom of the jacket. To release the bungee, unzip the jacket from the bottom up to find the cord locks just inside.)

All pockets designed to deflect moisture. Integrated in the collar is an under-the-helmet rain hood. Reflective panels on the front, side, arm and back keep you visible at night. Adjustable waist and arm straps provide a custom fit. Drop-tail design ensures the jacket will not ride up in the sitting position. The main front, 2-way YKK zipper is shielded from moisture by a double storm flap with rain gutter, held in place by spring-snap closures. Inside the storm flap on the left side is a security pocket with a red slider for visibility – easy access to storage without having to unzip the jacket.

When not in use, hang your gloves on the d-ring located below the lower right pocket. If you prefer to use an active safety device, there is a loop at the center back of the jacket for an L.E.D. accessory light (sold separately). To block wind and retain warmth, sleeve cuffs and fleece-lined collar are tipped with neoprene. Jacket-to-pant 10-inch full conjunction zipper fits easily through zipped liner portal and can be sewn onto your favorite pair of riding pants.

Stand-alone jacket included as a zip-in liner, fabric is a 3-layer laminate that is water and windproof and micro fleece lined to retain warmth. For airflow, there are two chest vents that line up with the chest vents on the outer jacket. Interior phone pocket on the left side and a map/cargo pocket on the right side. The TPG Rainier has these pockets in both the liner and the jacket. 2 year limited warranty. 2 year crash protection policy.

d3o
d3o Intelligent Shock Absorption is a patented, shock absorbing material, engineered with Intelligent Molecules that flow with you as you move, but lock together on shock to absorb the impact energy. d3o is rate sensitive, meaning that when moved slowly, the molecules flow freely, making it soft and flexible. At high speeds like in an impact, however, the molecules lock together, making the material an excellent shock absorber. The whole process occurs instantly, returning to its original state as soon as the impact is over and is repeatable.

These qualities make it perfect for any application where you need total freedom of movement and excellent shock absorption. d3o is also extremely low profile and integrates seamlessly into garments, so neither style nor function has to be compromised.