Highway Hawk Handlebar - 1 Inch - Ape Hanger - Black

Highway Hawk Handlebar - 1 Inch - Ape Hanger - Black

Buy Now. Earn 72 Reward Miles!
Submit Your Own Photo or Video

Free Shipping on orders over 199. Lowest Price Guarantee.
HACKER SAFE certified sites prevent over 99% of hacker crime.
Package Deals
Part Number: HH-55-2191B
MSRP: 79.92
Price: $71.99   Please note that due to currency fluctuations between date of order and date of shipment there can be a change in the amount in the local currency
Hurry, you save $7.93 today!
In Stock Usually ships within 2 business days what's this?



  • "Highway Hawk Ape hanger Handlebar
  • R-25 mm (1') in Black
  • Height - 41 cm, Depth - 19 cm, Width - 90 cm, Center - 25 cm
  • Made of High Quality Powder Coated Steel"


Write a review and share your experience.

Average Member Review: not rated yet

Related Products:

Highway Hawk Hand Grips w/ Out Throttle Assembly, Part: HH-45-0143 Highway Hawk Hand Grips w/ Out Throttle Assembly
$45.30 Price: $40.99   
Highway Hawk Master Cylinder Eagle Cover - Yamaha V-Star Models, Part: HH-452-004 Highway Hawk Master Cylinder Eagle Cover - Yamaha V-Star Models
$26.20 Price: $23.99   
Highway Hawk Hand Grips, Part: HH-45-0101 Highway Hawk Hand Grips
$52.46 Price: $47.99   

This accessory has not been reviewed yet. Write a review and share your experience.

This accessory fits:

Custom Fit - May Not Fit All Bikes
Please Read Product Description Fully
Call 888-302-9789 with Questions



Ask a Question about this product

Question & Answers:

    2005 V-Star 650 Classic

    posted on 10/23/13 by
    Thomas2 (Thomas2) from , , wrote:

    Would these fit a stock 2005 V-Star 650 Classic? I know I would need longer cables, just wondering about the fitment of the bars themselves.



     
    posted on 10/24/13 by
    cruisermark from , CA, United States, wrote:

    Hello Thomas,
    Yes, as long as you have the stock risers for 1" bars, you will have no issue fitting these to your V-Star. Basically, all you need to have is 1" clamps for this 1" diameter bar to be fitted properly. Below is a link to the cable kit for this 16" bar if you'd like. If you have any other questions or would like to get an order in, feel free to reach me directly at 925-583-2221. Take care and ride safe!

    16" Bar Cable Kit for 650 V-Star Classic:
    http://www.cruisercustomizing.com/cable-and-line-kit-16-inch-bar-yamaha-...




    Cables and grips

    posted on 05/20/13 by
    Simon2 (Simon2) from , , wrote:

    Hi,

    is the stock grips and raisers of my vulcan 800 will fit with it? What kind (lentgh) of wires and cables i have to buy to fit with it?

    Thanks



     
    posted on 05/30/13 by
    cruisermark from , CA, United States, wrote:

    Good day Simon,
    So from the information that I have, and you may want to take some measurements to confirm this, I show the stock bar to be a 1" bar and the rise to be 5-5.5". That Highway Hawk bar is 16" tall, so you'll need cables and lines that are 11-12 inches over stock. As long as you have the stock 1" bar then your grips and controls will fit that bar as well. If you have any further questions or would like to place an order feel free to contact us anytime via email or phone at 925-583-2200 or 888-302-9789 and a representative will be happy to assist you.You can reach me directly at 925-583-2221 or 888-302-9789 extension 221. My name is Mark, I'd be happy to assist you in finding everything needed for you and your bike. Take care and ride safe!




Scroll left
People who viewed Highway Hawk Handlebar - 1 Inch - Ape Hanger - Black also viewed
Scroll right
}
Web accelerated by IISpeed - Page Speed optimization by Google for Microsoft IIS and ASP.NET