HJC IS-2 Half Helmet - Matte and Metallic

ZOOM

• Advanced polycarbonate composite shell
• Superior fit and comfort using advanced CAD technology
• Manual integrated retractable sunshield
• Simple manual operation with a positive resistance
• Easy access to remove sunshield (no tools needed)
• Removable and washable SilverCool interior liner
• Moisture-wicking and odor-free with anti-bacterial fabric
• Double D-ring chin strap retention system
• Meets or exceeds DOT standards

Steps to Remove and Install Liner:

REMOVAL
1. Start by removing the front portion of the liner before working your way towards the back

a. There are (3) pressure clips on the along the front portion of the shell
b. Pulling straight down on the liner at the point at which the liner enters the space between the EPS and shell will release the (3) clips

2. Move to middle of shell and pull straight down on the liner at the point at which the liner enters the space between the EPS and shell
3. Again at the rear of the shell, pull straight down on the liner at the point at which the liner enters the space between the EPS and shell


INSTALLATION
1. Starting at the front, insert the liner until the (3) clips are firmly in place
2. Working towards the rear, insert the two friction clips at the mid-point of the helmet
3. Continue to the rear of the helmet and insert the remaining rear friction clip