Kisan TailBlazer for Goldwing 1800

Kisan TailBlazer for Goldwing 1800

Buy Now. Earn 90 Reward Miles!
Submit Your Own Photo or Video
Free Shipping on orders over 199. Lowest Price Guarantee.
HACKER SAFE certified sites prevent over 99% of hacker crime.
Part Number: KIS-25LED-D
Price: $89.95 Please note that due to currency fluctuations between date of order and date of shipment there can be a change in the amount in the local currency Usually ships within 6 business days what's this?



25LED-D unit is designed for Goldwing 1800 models with the spoiler LED light-bar.

This is a dual function unit - it powers the LED light-bar with low intensity as a Running Light, and upon brake activation it flashes the light-bar at full intensity.

25LED-D unit mounts on the back of the trunk lid.

When you apply the brakes the brake light will modulate fast at first then slow down to a solid On over a four second period.

Motorcycle Safety Foundation (MSF) suggests that you pump your brakes at each stop. tailBlazer does it automatically, and by flashing the bulb filament at maximum brightness.

WHAT DO THEY SEE?

As soon as you tap your brakes, drivers behind you will see a rapid flash of the brake lights. This sudden flashing invokes immediate attention.

WHAT WILL THEY THINK?

tailBlazer uses a flash pattern which decays exponentially - a well-recognized deceleration warning. The attention to the initial flashing now changes to a clear recognition that you're beginning to slow down!

Simply flashing brake lights or flashing them on & off will get the attention of drivers behind you, but it doesn't invoke anything else. Every split second of delay in their reaction reduces your safety margin.

The internal circuitry is controlled by a microprocessor. The trigger voltage to begin the deceleration flash pattern when the brakes are applied is set @ 12.1V min. Therefore you may need to have the engine running for brake flash to occur reliably.

The microprocessor can also be programmed to adjust intensity of the Running Light feature. Simply hold the brakes and then turn the ignition on three times quickly. There are two selectable intensities "High" and "Low".

Deceleration flash pattern for the brakes will always be at full intensity.


Write a review and share your experience.

Average Member Review: 5.00 (based on 4 reviews)
Would buy again: 100%

Here are the most recent member reviews for this accessory. See all Member reviews...

(5 stars) reviewed on 07/30/08 by
from West Chester, PA, United States, for a 2007 1800 wrote:

Easy to install once you find the brake wire. Traced taillamp relay wires to find correct wire to make series connection. Great attention getter. 3 stars overall due to high price for simple circuit.
Review Details 

6 out of 6 members found this review helpful.

Was this review helpful to you?  Yes No


(5 stars) reviewed on 04/15/07 by
Karl Baxter from Hillsboro, OR, United States, for a 2005 1800 wrote:

Great Safety item. Easy to install!
Review Details 

5 out of 7 members found this review helpful.

Was this review helpful to you?  Yes No


(5 stars) reviewed on 12/28/06 by
Steven Green from San Jose, CA, United States, for a 2005 1800 wrote:

Works well.
Review Details 

1 out of 3 members found this review helpful.

Was this review helpful to you?  Yes No


(5 stars) reviewed on 02/11/06 by
from Guthrie, OK, for a White 2005 1800 wrote:

This Product is a must for any one that has the rear spoiler. It makes the Rear Spoiler into a running/break light. When you apply the break it flashes for 4 seconds in a decelerating flash pattern then goes to a steady on. The spoiler came on the bike and I was so so with it until I added this product. Now every one I know that has followed me has commented on the flashing when I am slowing down or stoping. It gets there attention. The running light added that little extra at night that makes the bike stand out. I would rate the spoiler at a 3 until I put this on it now it is a 5. Instalation was easy but I was glad that I had a cordless drill. Lots of screws to take out and put back on the lid of the trunk. description on this product is not as good as it could be. It makes the Spoiler in to a Running / Break Light
Review Details 

1 out of 1 members found this review helpful.

Was this review helpful to you?  Yes No


See all Member reviews for Kisan TailBlazer for Goldwing 1800

This accessory has not been reviewed yet. Write a review and share your experience.

1800
4 reviews

This accessory fits:

- Honda Goldwing 1800



Ask a Question about this product

There are no Question & Answers at this time.
Scroll left
People who viewed Kisan TailBlazer for Goldwing 1800 also viewed
Scroll right
}