Member Reviews for Kuryakyn Splined Floorboard Adapters For Honda, Yamaha, Suzuki (Pair)

Important: SEE FITMENT DETAILS!


View installation guide

Write a review and share your experience with other members.

Average Customer Review: 4.00 (based on 93 reviews)

Breakdown:
4 Reviews
4 Reviews
1 Review

Sort By: Newest Oldest Highest Rated Lowest Rated Helpful Reviews

(4 stars) reviewed on 10/10/12 by Jim Medlin (retrorascal) from Porterville, CA, United States, for a 2005, spec 3, candy red 1800 VTX1800R (Retro) wrote: Used these to mount the Transformer II floorboards. They have a nice chrome finish and seem to be working as they were designed to do. INSTALLATION NOTE: Though in most applications these will be mounted in the fixed position, I recommend the use of the spring steel washer to make for a tight fit (I only had to use 1 on each mount). It will hold the adapter tight and assist the set screws in remaining secure. Use fresh locktite, don't rely on the dab of dried locktite that comes on the set screws from the manufacturer. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 08/31/12 by doug/fish scales (stinkinfish1) from shreveport, LA, United States, for a 2007navyblue&silver/spec3 1800 VTX1800R (Retro) wrote: needed for footboards Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 04/18/12 by VTXCruise (VTXCruise) from Aurora, CO, United States, for a 2002 1800 VTX1800R (Retro) wrote: I needed bigger passenger floorboards. I have Corbin Beetle Bags and that creates an issue. However with the following Kuryakyn parts KY-8818, KY-8837 & KY-4380 my problems are solved. The 4830's are the Transformer Series floorboards with a 2" extension. They look great, they work great, my wife LOVES the flip up foot rest. NOTE: We don't put a lot of weight on the front of the floorboard. We haven't had issues, but that would have to put a lot of torque on the splines and the mounts. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 09/05/09 by ziad (zsnajjar) from indianapolis, IN, United States, for a 2002 1800 VTX1800R (Retro) wrote: They do what they're supposed to Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 01/19/09 by Dave Langer (dwlanger) from Gig Harbor, WA, United States, for a 2005 Black 1800 VTX1800R (Retro) wrote: Easy install but cotter keys did not fit mt stock pins. Recommend egtting a new set prior to install. Review Details  Was this review helpful to you? Yes No

(3 stars) reviewed on 08/03/08 by viper1 (viper1) from Fargo, ND, United States, for a 2002 1800 VTX1800R (Retro) wrote: Needed these for the floorboards. The screws that are with it need to have more locktight applied when you install them, or else they will become loose. Due to the way the spines of the adapter and the floorboard on the left side of the bike mesh, they are a click off and don't align the board parallel to the ground. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 07/24/08 by (arlisbadley) from , , United States, for a 03 1800 VTX1800R (Retro) wrote: had to have it to fit boards Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 05/19/08 by Chupacabra (Chupacabra) from Chicago, IL, United States, for a 2003 1800 VTX1800R (Retro) wrote: Very easy install. The instructions tell you to keep the original pin and any retention clips. Make sure you do! The only reason that I gave this a 3 on the install was because of the install for my VTX 1800 Retro. The adapter had to be installed rigid so that the passenger floorboards moved, not the adapter. There are two adjustment screws that you screw out so that the adapter doesn't move. The smaller of the two would not screw in all the way because of the Locktite that they included on the screw plus you have to use a very skinny Alan wrench which does not give you much strength to turn it. I cleaned out the Locktite and used the regular liquid Locktite and it worked fine. The larger of the two adjustment screws was fine. Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 04/19/08 by Dan (baldreaper) from Racine, WI, United States, for a 2003 Honda Black 1800 VTX1800R (Retro) wrote: It is what it is, and was needed. Review Details  Was this review helpful to you? Yes No