These fork extenders (COME AS A PAIR) are a direct replacement for the stock fork caps on all Honda Fury motorcycle. They measure almost 1" (.90") longer than stock fork caps which will give you a 1/2" rise in the front of the Honda Fury. Why only 1" (actually .90") taller, well because this creates a seamless look with the front fork tubes, if the fork extenders were longer you would see the line where the extender meets the fork tube under the top triple tree. The Honda Fury Custom 1" Fork Extender length creates a seamless look, the polished top on the fork extenders look more custom and cleaner than the stock raw fork caps. With the slight
lift in the front the handling is not effected and the combination of the fork extenders and our lowered shock separate your Honda Fury from the rest.
The material is solid billet 6061T aluminum material with a High polish top surface.
This product is sold in pairs. You get 2 extenders for $105. No other items are needed to install this product. Please beware, this product will extend out your front wheel and brake line, there is plenty of slack on the brake line to accommodate this product, but if you have risers and want to install this product you might have to extend your brake line. We do offer brake line in any size and color if needed.
FAQs
- Do I have extend my control lines for the fork extenders?
You do not have to extended the control lines (Brake, Clutch, Throttle) with the stock handle bar setup.
- Can I install these extenders my self?
Yes, the install is very easy, but you will need a bike jack and some basic shop tools.
- Do these extenders come chrome or polished?
The extenders are polished only on the top side to match the polished triple trees.
- How do I clean this product?
Always use a soft cloth and soft cleaning solution like Windex etc.
- Does this kit come with everything I will need?
Yes, this kit comes with everything.
Note: Approximate Installation Time= 1.0 Hours