These fork extenders (COME AS A PAIR) are a direct replacement for the stock fork caps on all Honda Fury motorcycle. They measure 3" longer than stock fork caps which will give you just over a 2.3" rise in the front of the Honda Fury. The 3" Fork Extenders will also push out the front tire approx. 1.8" over stock. These Extenders will meet the fork tubes below the top triple tree. So you will see a seem and a difference in material as the Fork extenders are aluminum and the Fork tube is Stainless Steel. With the polished top on the 3" fork extenders this product will look more custom and cleaner than the stock raw fork caps. The polish is very good, but you can always make it better with some Mother Aluminum polish. With the lift in the front the handling will change, creating more high speed stability and less scrapping your foot pegs. We suggest our lowered shock for the best overall performance.
The material is solid billet 6061T aluminum material with a High polish top surface.
This product is sold in pairs. You get 2 extenders for $105. Please beware, this product will extend out your front wheel and brake line, you will be stretching your brake line out. We do suggest a new extended brake, we have many sizes and colors to fit your style.
NOTE: We have no pictures available of the 3" Extenders install on a Stock Fury. Sorry, we know this is important to see what the Extenders will look like, but all we can offer is our spec sheet (image above) and a lifetime warranty on the product.
- Do I have extend my control lines for the 3" Fork Extenders?
YES, you do have to extended the brake line, but the other control lines (Clutch, Throttle) will not be effected with the stock handle bar setup.
- Can I install these extenders my self?
Yes, the install is very easy, but you will need a bike jack and some basic shop tools.
- Do these extenders come chrome or polished?
The extenders are polished on the top and sides to match the polished triple trees and fork legs. You might need to do extra polishing to satisfy your needs.
- How do I clean this product?
Always use a soft cloth and soft cleaning solution like Windex etc. You can also use Mother aluminum polish to improve the shone or take away scratches.
- Does this kit come with everything I will need?
No, you can try to use your stock length brake line by re routing the line, but we suggest replacing the line with an extended brake line. Your going to improve stopping power with an aftermarket brake line over stock.
Approximate Installation Time= 1.0 Hours