Low and Mean Full Wrap Rear Fender- Yamaha XV950 V-Star Models (All)

ZOOM

The LM Full Wrap Rear fender fits perfectly on the V Star 950. This fender is much longer and lower than the stock fender. The fender is a direct replacement for the stock fender, however the basic price of $475 gets you the basic starting point. There's no brake lights, license plate holder or door to access the storage like you see on our custom V Star 950. These options are available for an upgrade. Check out our options at the top for more details. The basic fender is a great starting point for a good price. This fender will bolt on with the side stock hardware and except the stock side chrome pieces. The top holes for the passenger seat will not be drilled unless requested. The top belt guard will also need to be removed as the fender sides cover this area. The fender was designed around a lowered motorcycle. We suggest our Air ride suspension which you can find at the bottom of this product page as a "Related Product". Also this fender will have a build in storage compartment, but it will not be assessable unless you cut a hole in the back of the fender and add out storage door option. IF you order the basic fender and decide you want to have the storage option you can special order these items separate and you will see scratch lines in the fender where you will need to cut the openings. There's many options for a tail light and license plate mount. We can offer you a bolt-on billet plate that will sit on top of the fender. Or you can do a side mount and keep the fender clean. You also have the option to have it just like our custom bike. All of these options are upgrades which will add the the price. You'll also have the option to reuse your stock tail light and wiring. With a fender this big there many options. This fender is offer with a gel-coat black finish ready to sand, primer and paint. We can also offer factory color matching on most colors.with an integrated tail light. This fender comes standard with a semi-gloss black gel-coat finish, intended to be sanded for primer and paint, and is made out of hand laid fiberglass composite which gives the fender a very strong construction. The fender comes ready to bolt on with instructions. Color matching to the V Star 950 factory color is available on request. Please understand this fender is made to order and a small wait time to make the product and ship should be expected.

What you need to know:

• The fender does not have a finished surface, there is a gel-coat finish that is meant to be sanded for primer and paint, so it may come with a few minor surface scuffs.
  
• This is a made to order item

FAQs

• Can I run a larger tire with this fender?
  Yes, You can run up to a 200 rear tire, but understand the fender will not hold you back it will be the stock frame that will not allow anything bigger then a 200 series tire.
  
• Is this fender strong like a steel fender?
  This fender was designed to handle the stress of an aggressive rider and normal weather condition. Our fiberglass composite products are only made from the best available materials. Durability is not an issue.
  
• Can I carry a passenger?
  Yes, the stock seat can be re-install just like with the stock fender

Note: Approximate Installation Time= 1.0 Hours