The Low Seat Pan for the Honda Fury allows you to build your own style of seat. Low and Mean has designed the lowest seat pan on the market. Giving you the most room to add your own foam and seat cover. When you compare our Low Seat Pan to the stock pan, the Low and Mean Low Seat Pan is 1.25" lower, this allows you to have a lower seat height with the same amount of foam then stock. There's no bolts to attach this seat, we use an industrial duel lock Velcro which is industry standard on most custom Harley's. Our pan is also narrower and flows into the gas tank, where the stock seat sits on top of the gas tank. We feel the new Low Seat Pan is the perfect match to bring the great lines from the gas tank into the fender. This Low Seat Pan is made from hand laid fiberglass composite, comes with all hardware and instructions. NO FOAM, NO COVER included.
Does the Velcro hold the seat down?
- What do I do about a passenger seat?
We suggest going to a suction cup passenger seat, they are very affordable on Ebay.
Yes, the Velcro is very strong, almost too strong, you have to really pull on it to remove.
Do I have to remove anything to install this seat pan?
The seat will sit right down on the frame, you should not have any issues with the stock set up. If you changed the bike at all we can not guaranty the seat will fit as designed.
Will this seat work with changing the rear fender?
The Low Seat Pan will work with our rear fender very well, but we can not say for sure if it will work for all others.
What do I do about foam and a cover?
We suggest taking your motorcycle to a local upholstery shop so you can personally sit and feel the foam so your designing the seat to fit you.
Do I need a professional mechanic to install this product?
This is always suggested, but this depends on your own garage skills, please know your limits and watch our install video above. Give us a call if you have any questions.
Can i staple into this seat pan?
No fiber glass does not receive staples well, we usually glue our seat covers to the back side of the seat pan.
Note: Approximate Installation Time= 0.25 Hours