Note: Image Shows Seat With Foam and Cover. Actual Seat is Foam and Base Only (Cover Is Not Included)
SEE FITMENT DETAILS!
The Low and Mean Low Rider Seat Pan and Foam was designed so the DIY Fury guy could attach his or her custom cover to our seat pan and foam. We designed the foam to follow lines of the tank and flow thru the seat and into the rear fender giving your bike a clean custom look. We also designed the seat pan 1.25" lower than stock so at the lowest part of the seat there is 2" of foam for extra comfort. When you compare our Low Seat Pan to the stock seat pan, the Low and Mean Low Seat Pan is 1.25" lower, this allows you to have a lower seat height with 1/4 more foam then stock. There's no bolts to attach this seat, we use an industrial duel lock Velcro which is industry standard on most custom motorcycles. Our pan is also narrower and flows into the gas tank, where the stock seat sits on top of the gas tank. We feel the new Low Seat is the perfect match to bring the great lines from the gas tank into the fender. This Low Seat Pan is made from hand laid fiberglass composite, the foam is soft to the touch with a firm support. When you attach your seat cover to our fiberglass pan you will need to use high-end glue as staples will not go through our fiberglass pan. There's no hardware that comes with this seat, just a dual lock Velcro to fasten it to the fender.
NOTE: Picture show above does have a cover, but it is just an example of the foam shape.
WHAT YOU NEED TO KNOW:
•This seat is a direct replacement for the stock seat.
•Passenger seat will not bolt back on, this is driver seat only. Passenger seat does not attach to the LM driver seat, but you could try to bolt the passenger seat to the rear fender.
•LM Seat shows more of the gas tank, where your stock seat was covering, possibly rubbing on.
•LM Seat hooks under gas tank and then Velcros down to the rear fender.
•Seat is water resistant, but not water proof. If you wash your motorcycle, take off your seat.
•Attaching your cover will need to be glued not stapled.
•What do I do about a passenger seat?
You could try to bolt-on your stock passenger seat, but this will not just bolt to our LM custom seat. If you wanted something different and simple. We suggest going to a suction cup passenger seat, they are very affordable on Ebay.
•Does the Velcro hold the seat down?
Yes, the Velcro is very strong, almost too strong, you have to really pull on it to remove.
•Do I have to remove anything to install this seat pan?
The seat will sit right down on the frame, you should not have any issues with the stock set up. If you changed the bike at all we can not guaranty the seat will fit as designed.
•Will this seat work with changing the rear fender?
The Low Seat Pan will work with our rear fender very well, but we can not say for sure if it will work for all others.
•What do I do about foam and a cover?
We suggest taking your motorcycle to a local upholstery shop so you can personally sit and feel the foam so your designing the seat to fit you.
•Do I need a professional mechanic to install this product?
This is always suggested, but this depends on your own garage skills, please know your limits and watch our install video above. Give us a call if you have any questions.