National Cycle Complete Lightbar - VTX 1800

National Cycle Complete Lightbar - VTX 1800


Buy Now. Earn 270 Reward Miles!
Submit Your Own Photo or Video

Free Shipping on orders over 199. Lowest Price Guarantee.
HACKER SAFE certified sites prevent over 99% of hacker crime.
We Will Match Any Price
Part Number: NC-N942
MSRP: 299.95
Price: $269.99   Please note that due to currency fluctuations between date of order and date of shipment there can be a change in the amount in the local currency
Hurry, you save $29.96 today!
FREE SHIPPING*
In Stock Usually ships within 1 business day what's this?



Windshields and Light Bars are not only practical, they make a good looking combination for cruisers. Our Out in Front package comes with a guarantee: our light bar will fit any National Cycle Windshield. Steel, high-strength material will not fatigue with weight bearing and high-stress loads. Finished in National Cycle quality bright chrome. National Cycle light bars come fully assembled and pre-wired complete. All mounting hardware is provided. Approved for use in Commonwealth of Virginia. (NC-N9005 visors sold separately)
Important: SEE FITMENT DETAILS!


View installation guide

Required Accessories:

Show Chrome Accessories (Big Bike Parts) Dual Accessory Switch Block - 1 inch Cruiser Bars, Part: BBP-13-207 Show Chrome Accessories (Big Bike Parts) Dual Accessory Switch Block - 1 inch Cruiser Bars
$109.95 Price: $90.99   
Required accessory!
Cobra Steel Lightbar - Honda VTX1300 R/ S/ VTX1800 C/ R/ S, Part: BLV4-0151 Cobra Steel Lightbar - Honda VTX1300 R/ S/ VTX1800 C/ R/ S
$309.95 Price: $278.99   
Required accessory!

Write a review and share your experience.

Average Member Review: 4.11 (based on 71 reviews)
Would buy again: 80%

Here are the most recent member reviews for this accessory. See all Member reviews...

(4 stars) reviewed on 04/24/09 by
Bruce Farmer (bdfarms) from , AZ, United States, for a 0 1800 VTX1800R (Retro) wrote:

This light bar is exactly what it says. It has been good and works fine. I only have one issue with it. Why did National Cycle leave the elbows exposed where the light bar connects with the lights. They should have made an elbow piece to conceal the wiring so it would not be out in the open weather. If I were to do it over again, I might look at a more finished product. This works well though other wise.
Review Details 

Was this review helpful to you?  Yes No


(4 stars) reviewed on 04/13/09 by
Chuy Atilano (chuy59) from Cudahy, WI, United States, for a 2003 1800 VTX1800R (Retro) wrote:

Super good looking lights
Review Details 

Was this review helpful to you?  Yes No


(4 stars) reviewed on 02/15/09 by
Setrocana (setrocana) from Mount Vernon, WA, United States, for a 2003 1800 VTX1800R (Retro) wrote:

Great look. Don't forget to order the hoods for them as well. Moving the turn signals was a bit difficult. The wires are just barely long enough, and the fork tubes are just a bit larger diameter below the triple tree. I also chose to wire mine through a relay. I mounted the relay behind the right side cover. I bought a generic relay kit from Schucks, and used the Big Bike Parts Cast switch to run them. It probably wasn't necessary, but I was concerned about having them on the same circuit as my headlight, as the instructions suggest. I'd rather have them separate so they can back each other up in case of a overload.
Review Details 

2 out of 2 members found this review helpful.

Was this review helpful to you?  Yes No


(1 stars) reviewed on 01/22/09 by
joliveto (joliveto) from , , United States, for a 2007 T 1800 VTX1800T (Tourer) wrote:

these WILL NOT fit the 1800 Tourer like the picture first off you can not move the turn signals down. the bulbs on the light bar are too big and 1/2 way cover up the turn signals. the product is good, just don't get these and think they will fit the Tourer outta the box. I trusted custom cruisers cause I bought other products from them and when they put it fit the tourer, I thought it would .. problem is I had to go out and pick up smaller bullet lights and replace the original ones. now they look semi OK they don't give off the light the ones in the picture. I'm not blaming anyone for this goof I should have looked myself to make sure this would all fit. also you can't put them on the way the instructions tell you the TOURER windshield won't allow it. you have to GO OUT and get some washers and longer bolts that and hook it up underneath the bar. ((thanks to VTXOA for the help)) if you have a TOURER AND you think your gonna get these and slap them on don't get it. if you have a TOURER...
Review Details 

2 out of 2 members found this review helpful.

Was this review helpful to you?  Yes No


(2 stars) reviewed on 01/02/09 by
blmicha (blmicha) from Escondido, CA, United States, for a 2006 1800 VTX1800R (Retro) wrote:

Received the product in good shape. I was a little frustrated with the exposed wires, but decided to cover them with black shrink wrap. Then I went to install and discovered that I can't relocate my stock turn signals without leaving a gaping hole in my stock chrome fork covers. I have a 2006 VTX 1800S Spec3. The Spec3 adds extra chrome which for the forks accommodates the turn signals in a specific location. I don't intend to return the lights. Instead, I will modify them buy shortening the bar (brings the lights a little closer to the headlamp) and raising the bracket on the end. This will put the new lamps up and in clearing the turn signals. Extra work I didn't expect, but in the end it's all about "Cruiser Customizing"....It's been 4 months of operation and my ignition switch has failed. I've determined that the plastic switch melted due to the extra current induced by the additional lights. The low beams operate through the ignition swith in it's "static" position. I wi...
Review Details 

1 out of 1 members found this review helpful.

Was this review helpful to you?  Yes No


See all Member reviews for National Cycle Complete Lightbar - VTX 1800

This accessory has not been reviewed yet. Write a review and share your experience.

1800 VTX1800C
32 reviews

1800 VTX1800R (Retro)
30 reviews

1300 VTX1300R (S) Retro
5 reviews

1800 VTX1800N
1 review

1800 VTX1800T (Tourer)
1 review

1500 Valkyrie Standard
1 review

1500 Vulcan Drifter
1 review

This accessory fits:

- Honda 1800 VTX1800C
- Honda 1800 VTX1800F
- Honda 1800 VTX1800N
- Honda 1800 VTX1800R (Retro)
- Honda 1800 VTX1800S
- Honda 1800 VTX1800T (Tourer)


Important Fitment Details:
Only fits 06 and newer VTX 1800F (Spec 1 Only)
All VTX 1800N (Spec 1 Only)
Only fits 02-07 VTX 1800C (Spec 1 Only)
All VTX 1800R (Spec 1 Only)


Ask a Question about this product

There are no Question & Answers at this time.
Scroll left
People who viewed National Cycle Complete Lightbar - VTX 1800 also viewed
Scroll right
}