Product Review

For Accessory:

Show Chrome Accessories (Big Bike Parts) Adaptor Bolts for Risers - Kawasaki Vulcan

Show Chrome Accessories (Big Bike Parts) Adaptor Bolts for Risers - Kawasaki Vulcan

Reviewed by: (Starfurry
Reviewed for: 2012, Candy Arabian Red 900 Vulcan Classic
Used for: < 1 month

Ratings:
Overall Rating: 5
Ease of install: 3
Value: 5
Would buy again: yes




Review Summary:
Needed for the risers to connect them to our Metric motorcycles, The issue is our steering head is that its a metric 10mm and most risers are imperial. So this bolt lets us go through the 10mm hole that's in our steering head and the larger diam goes into the risers. Make sure you use RED loctite (perm) when fitting these bolts into the holes in the risers. That way the bolt will not come loose. You then use blue loctite on your 10mm bolt head that is on your stock motorcycle, you reuse those nut's onto these bolts. First of all i screw in the bolt to the riser, put the riser down through the steering head to make sure the length is fine, I make sure i have enough thread coming through so i know how far I can screw the bolt into the riser (you need to go in at least 12mm to be secure) Once you know everything will fit go buy some red lock-tight and use it on the bolt thread you put into the riser (Let that cure for 24 hours before finishing installation) Once its cured, install the risers onto the bike and secure the bolt and nut with blue lock-tite so it doesn't come loose.


Review Pros:



Review Cons:



Review Improvements:



Review Tools:


Was this review helpful to you?



}