Rivco Handlebar Risers - Kawasaki Vulcan Classics/ Nomads/ 1500/1600/ 2000

Rivco Handlebar Risers - Kawasaki Vulcan Classics/ Nomads/ 1500/1600/ 2000
Member Submitted Photos & Videos
Submit Your Own Photo or Video
Powered by MotoTribe
Free Shipping on orders over 199. Lowest Price Guarantee.
HACKER SAFE certified sites prevent over 99% of hacker crime.
Package Deals
Part Number: RIV-VUL017
Price: $182.95 Please note that due to currency fluctuations between date of order and date of shipment there can be a change in the amount in the local currency Available Special Order.
Usually ships within 2 business days
what's this?



  • These risers are CNC machined from billet aluminum, then polished to a mirror finish and triple chrome plated.
  • They bring the bars back a full 2" and up 3/4".
  • This significantly reduces rider back, neck, and shoulder strain and allows for a more relaxed riding position.
  • They bolt on in minutes and retain all stock hoses and cables.
  • Our Nomad rider/customers have told us that these risers work perfectly with the factory Fire & Steel Tachs.


Note: Comes with bolts and washers for the bottom, utilizes stock caps and bolts on the top.


Write a review and share your experience.

Average Member Review: 4.75 (based on 12 reviews)
Would buy again: 100%

Here are the most recent member reviews for this accessory. See all Member reviews...

(4 stars) reviewed on 06/16/13 by
dave sutherland (suvo) from Newcastle, , Australia, for a 2005 1600 Vulcan Nomad wrote:

Good stuff

Very happy although pull back only about 1 inch not 2


Review Details 

1 out of 1 members found this review helpful.

Was this review helpful to you?  Yes No


(5 stars) reviewed on 11/19/12 by
Mal Johnston (truckie62) from AUSTRALIND, WA, AU, for a 900 Vulcan Classic wrote:

Great product positions bars perfectly excelent quality finish easy to install
Review Details 

Was this review helpful to you?  Yes No


(5 stars) reviewed on 10/26/12 by
from maple ridge, BC, Canada, for a 2003 1500 Vulcan Classic wrote:

They installed very easily and I'm pleased with the finnish. The only issue I have is they raise the handle bars 2 inches and back 3/4 inch (just look at the picture). In the ad it says back 2 inches and up 3/4 inch, so be aware of this. Either way I'm able to point the grips down more, which for me makes for a more comfortable riding position, so I am happy with them.
Review Details 

Was this review helpful to you?  Yes No


(5 stars) reviewed on 03/17/12 by
mike (mikeydbama) from Silverhill, AL, United States, for a 07 Black w/ loads of chrome 1600 Vulcan Classic wrote:

Just put these on and the difference is amazing. Install was easy!!! 32 Minutes. Keep in mind you are working with aluminum and don't gorilla tighten the bolts. Went on about a 100 mile ride right after install and the difference in the position of the grips was really comfortable and you sit more in an upright position. There is a difference in turning that is more comfortable as you are not stretching out in a really tight turn. The drops of never seize was a really nice touch from the factory. I highly reccommend these risers.
Review Details 

Was this review helpful to you?  Yes No


(4 stars) reviewed on 01/05/12 by
John Wright (Jwright1125) from , , for a 2003 1600 Vulcan Classic wrote:

These give that little extra level of comfort that will multiply itself on a long ride; without having to replace all your cables. Install took about half an hour. Be careful when you tighten them down. I put a scratch on my triple tree when one turned while finger tightening.
Review Details 

Was this review helpful to you?  Yes No


See all Member reviews for Rivco Handlebar Risers - Kawasaki Vulcan Classics/ Nomads/ 1500/1600/ 2000

This accessory has not been reviewed yet. Write a review and share your experience.

1600 Vulcan Nomad
4 reviews

1600 Vulcan Classic
4 reviews

1500 Vulcan Classic
2 reviews

Dyna Glide
1 review

900 Vulcan Classic
1 review

2000 Vulcan Classic
1 review

2000 Vulcan Classic LT
1 review

This accessory fits:

- Kawasaki 800 Vulcan Classic
- Kawasaki 900 Vulcan Classic
- Kawasaki 900 Vulcan Classic LT
- Kawasaki 1500 Vulcan (A-C)
- Kawasaki 1500 Vulcan Classic
- Kawasaki 1500 Vulcan Classic Fi
- Kawasaki 1500 Vulcan Drifter
- Kawasaki 1500 Vulcan Mean Streak
- Kawasaki 1500 Vulcan Nomad
- Kawasaki 1500 Vulcan Nomad Fi
- Kawasaki 1600 Vulcan Classic
- Kawasaki 1600 Vulcan Mean Streak
- Kawasaki 1600 Vulcan Nomad
- Kawasaki 2000 Vulcan
- Kawasaki 2000 Vulcan Classic
- Kawasaki 2000 Vulcan Classic LT



Ask a Question about this product

Question & Answers:

    will these fit a 2013 Kawasaki Voyager 1700 ABS with 1 1/4 " bars

    posted on 09/12/13 by
    KerryWallace1 (KerryWallace1) from Acton, ON, CA, wrote:

    will these fit a 2013 Kawasaki Voyager 1700 ABS with 1 1/4 " bars



     
    posted on 09/16/13 by
    cruisermark from , CA, United States, wrote:

    I don't think so, as Rivco doesn't specify years. I would assume they're only going to fit the earlier years. I would suggest contacting Rivco to see if they have further information on them. You can check them out at rivcoproducts.com or call them at 888-801-8222. They should be able to give you more specific information. Take care and ride safe!



    posted on 09/16/13 by
    KerryWallace1 from Acton, ON, CA, wrote:

    Thanks for your reply but Kawasaki changed the diameter of the bars for their 2013 Voyager, they are now 1 1/4" bars. Will these risers fit them as the do not give a diameter size in the product description.

    Thanks,

    Kerry Wallace



    posted on 09/13/13 by
    cruisermark from , CA, United States, wrote:

    Hello Kerry,
    These are designed to fit the stock application. I believe the stock bar is a 1" bar, but you'll want to verify that first. Hope this helps. If you have any other questions or would like to get an order in, feel free to reach me directly at 925-583-2221. Take care and ride safe!