Member Reviews for Show Chrome Accessories (Big Bike Parts) 4 in. Square Cast Riser with Cutout Design

Important: SEE FITMENT DETAILS!

Write a review and share your experience with other members.

Average Customer Review: 4.64 (based on 116 reviews)

Breakdown:
28 Reviews
6 Reviews
1 Review

Sort By: Newest Oldest Highest Rated Lowest Rated Helpful Reviews

(5 stars) reviewed on 03/19/12 by Kevin Paglia (Rhodie) from Lodi, CA, United States, for a 2005 1300 VTX1300R (S) Retro wrote: Love the look of these on my VTX1300. Replaced stock with these. The only "prblem I ran into is the Windshield. The wiring was ran outside the hardware so the extra length of the 4in risers made thbings a little tight. Not really much of an issue until I am parking and have the bars all the way over. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 10/09/10 by Christopher Perdue (chrisperdue) from Cedar Park, TX, United States, for a 2003 Illusion Blue 1300 VTX1300R (S) Retro wrote: These risers really put my bars within reach. The risers brought the bars far enough up and back that I'm sitting comfortably upright with my elbows bent instead of hunched forward reaching (I am 5'8). That "pinch" in my back is gone. Easy to install; did not require cable/wire modification. Beautiful fit and finish. INSTALLATION FYI: The washer that came off of the nut side of the stock risers fits perfectly in the recess on top of the triple tree. I see some reviewers bought new washers, but there is no need. Also, instructions do not call for it, but I recommend using Loctite on the bolt threads. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 09/24/10 by Luke Reyna (LucianoReyna) from Madera, CA, United States, for a 2005 Magenta 1300 VTX1300R (S) Retro wrote: Real nice piece of chrome super heavy and super shiny, put these on and makes my ride much more comfortable, bought some washers to place under the risers and on top of the Kuryakan triple tree cover, square peg and a round hole don't look good, so the washer helps the appearance. Real easy to install, cable clearance was no problem. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 07/18/10 by Tim O'Brien (Tpobie) from Essex Junction, VT, United States, for a 2004 Blue 1300 VTX1300R (S) Retro wrote: Looks great, allows me to sit more uprite, less reaching. Install was easy, protect your tank with a blanket to prevent scratching. I had to get SS washers to place between the riser and the tripple tree, oem risers recess into the triple tree, new risers are squared and do not fit into a round hole. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 02/13/10 by RuthAnn Baugus (ruthiebaugus) from Seminole, OK, United States, for a 2006 1300 VTX1300R (S) Retro wrote: I am a 5ft tall woman and so this was a must add item plus it was a very nice add on for the look I am wanting Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 07/29/09 by Chartman Toole (RCToole) from Greenwood, IN, United States, for a 2010 EG Classic 1300 VTX1300R (S) Retro wrote: Pull Back Risers: Purchased 7/25/09. After my 1,600-mile/33-hour Iron Butt ride last year, and my recent 1,500 mile trip to Wisconsin, I was tired of my muscles between my shoulder blades getting sore & tight. I am hopeful these will do the trick, without requiring much if any modification to the bike. I learned a few things when installing these on my X. This procedure took to me about 45 minutes, but I am a little over-cautious. I thought I would share my experience. Maybe it will help someone. Tools I used: o Motorcycle lift (not absolutely necessary) o Masking tape o Two comforters o Hammer o Small level o Small flat-blade screwdriver o Single-sided razor blade o 5mm & 6mm allen wrenches o 19mm open end wrench Procedure: - I placed my X on a small lift, and raised it just high enough to make it stand up straight. I personally think it is easier to work on things l... Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 04/10/09 by mark legg (semperfi1037) from marshalltown, iowa, IA, United States, for a 2007 1300 VTX1300R (S) Retro wrote: very nice Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 10/05/08 by GEORGE GRIPPEN (slickfinish) from SACRAMENTO, CA, United States, for a 2004 1300 VTX1300R (S) Retro wrote: i like where the handle bar is at now Review Details  0 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 09/05/08 by Harry (VTX_Aussie) from Wollongong, , for a 2007 1300s Titanium 1300 VTX1300R (S) Retro wrote: Easy to install once the OEM part taken off. Fits like a glove. nice piece of chrome. Even better out on the road. What a difference in riding position. Best accessory that I have puchased for my VTX. Review Details  Was this review helpful to you? Yes No

(5 stars) reviewed on 08/22/08 by Danny (diversified-1) from Parsons, TN, United States, for a 2005 silver 1300 VTX1300R (S) Retro wrote: puts the bars back where I can ride comfortably on my long commute Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 08/07/08 by Mike Pryor (mpryor) from Robinson, TX, United States, for a 2007 1300 VTX1300R (S) Retro wrote: real nice quality and easy to install with two people. Puts the bars in perfict position, I'm 5'11". I installed a mustang seat that moved me back some so I had to get these risers. Highly recommend. Review Details  Was this review helpful to you? Yes No

(4 stars) reviewed on 07/16/08 by PissyMater (mscott876) from Wallingford, KY, United States, for a 2005 Silver 1300 VTX1300R (S) Retro wrote: really helped my arm position Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 05/07/08 by don alexander (sayrepa) from marlton, NJ, United States, for a 2003 1300 VTX1300R (S) Retro wrote: Easy to install, looks and feels great. Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 02/02/08 by Dena (VTXGRL) from Grapevine, TX, United States, for a 2006 1300 VTX1300R (S) Retro wrote: much more comfortable on my arthritic shoulders now Review Details  1 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 01/11/08 by Barry Burress (beburress) from Fredericksburg, VA, United States, for a 2005 Candy Red 1300 VTX1300R (S) Retro wrote: excellent risers Review Details  Was this review helpful to you? Yes No

(2 stars) reviewed on 11/17/07 by Kurt Mockros (ilmfoffiver) from St Cloud, MN, United States, for a 2006 Black 1300 VTX1300R (S) Retro wrote: After them being on back order for three months, and cruiser customizing not knowing when they would come, they are finally on the bike. Now it is snowing so I can't tell you how they ride. The risers them self are nice the fit and finish could be much better. They don't cover the holes from the stock risers, so I bought chrome washers large enough to cover. Make sure you get the new bolts. They put they bars where I wanted them, and all the cables and wires reach fine. Review Details  2 out of 3 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 08/10/07 by DCMcNabb (rev444) from Hixson, TN, United States, for a 2005 Black 1300 VTX1300R (S) Retro wrote: The slotted risers add an awesome detail to the cockpit area. They allow for a more upright riding posture which adds to comfort. Easy to install, but my wife's assistance was extremely valuable. They will likely require some tweaking of cables, not to the point of replacing the stock, but some of the clamps (holding cables) may need to be adjusted. Review Details  4 out of 4 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 07/29/07 by Mark (KiwiBoy) from Auckland,New Zealand, , Asia, for a 2007 VTX 1300S Titanium 1300 VTX1300R (S) Retro wrote: Look great and went on pretty easily. Even with just the std handle bars these risers have brought the grips closer into a much more comfortable position. Would have been nice to have covers for the hex nuts and maybe a slightly fatter base as they barely cover the marks from the oem risers. But all and all I'm pretty happy and believe them to be good value. Review Details  3 out of 4 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 07/10/07 by Tim (Trellis) from Fresno, CA, for a 2006 Candy Black Cherry 1300 VTX1300R (S) Retro wrote: This is a great piece, very nice finish. I am 6'1" and It brought my hands back to the perfect position. Review Details  0 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 04/03/07 by pipeguy Wright (pipeguy) from Lapeer, MI, United States, for a Red 2005 VTX1300R studded leatherlyke bags 1300 VTX1300R (S) Retro wrote: One of the best additions I have made. Pulling the bars back took away all of the neck pain and burn I was getting while riding. And they look great. Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No