Member Reviews for Show Chrome Accessories (Big Bike Parts) 4 inch Round Handlebar Risers

Write a review and share your experience with other members.

Average Customer Review: 4.00 (based on 163 reviews)

Breakdown:
5 Reviews
4 Reviews
2 Reviews
1 Review
4 Reviews

Sort By: Newest Oldest Highest Rated Lowest Rated Helpful Reviews

(5 stars) reviewed on 02/21/08 by Yoda (Yoda53) from Shavertown, PA, United States, for a '02 Black and Blue 800 Intruder Volusia wrote: These not only look great but they were able to pull my handle bars back enough to stop the pinching effect in the middle of my shoulder blades. Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 12/06/07 by Jon (yabuisha) from Honolulu, HI, United States, for a 2003 800 Intruder Volusia wrote: Look good & definitely improves feel. DON"T FORGET TO ORDER THE BOLTS. Review Details  Was this review helpful to you? Yes No

(1 stars) reviewed on 04/30/07 by jim (drjim) from Colorado Springs, CO, United States, for a 2005 Magenta 800 Intruder Volusia wrote: Worked great on my VTX 1300. Easy to install and look great. Did NOT require any extra bolts. Packages says not recommended for 1800. However for Volusia you NEED special bolts. No way to tell that from this web site. They even suggest bolts for VTX and you don't need them ANd they suggest bolts for 1800 and MFG says not recommended. Someone needs to get their story straight. Don't buy for Volusia - full stop turns they hit speedometer. With windshileld you cannot see them.......NOT for Volusia. Review Details  6 out of 6 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 03/11/07 by MO (oglesbee) from Lima, OH, United States, for a 03 Custom Paint 800 Intruder Volusia wrote: had to make fit but worth it coper tube cut down midel to take up space and longer bolts helps with short arms Review Details  0 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 07/23/06 by Rooster (mtlivengood) from Gold Hill, NC, United States, for a 2004 Black 800 Intruder Volusia wrote: The risers I have are very similar to these, but not exact. Mine are straight, 4 inch, billet. I bought them from a friend of mine who builds custom bikes. They came with a set of drag bars he ordered. After installing my forward controls, I needed the bars a little closer to me. These did the trick. Easy install. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 04/23/06 by Brian Doove (dooveman) from Surrey, BC, Canada, for a 2004 800 Intruder Volusia wrote: Need 2 people to make the install easier. But worked out well and they make a real difference. Made a very tight u-turn no problem during my test ride. And they look great. Some people claim they strip. I heeved on mine because if they are going to fail, they are going to fail on install. They didn't. I also used all the washers including the rubber ones. Didn't notice a left and right. Maybe I lucked out. You do need to take it slow though. Connect the handle bar with the triple tree loose. Tighten the bar so that the tree can be tightened using the bar to hold the angle. Then re-adjust the handle bar for comfort and tighten all the way. Then check your bar is horizontal. Loosen and retighten the triple tree bolts if need be. And wella!. Now if they strip during riding, you won't get and update from me;-) Review Details  2 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 12/08/05 by VolusiaGuy (Oxford) from Spring Hill, FL, United States, for a 2000 MM Edition 800 Intruder Volusia wrote: Easy to install and really improved my hand position. Made riding a lot more comfortable. Review Details  1 out of 1 members found this review helpful. Was this review helpful to you? Yes No

(2 stars) reviewed on 09/09/05 by Goper (Goper) from Montreal, QC, Canada, for a 2004 800 Intruder Volusia wrote: Decided to do it tonight at my friend home ( he has a garage and he has plenty of tools etc......) 1- So, we installed the riser the way they describe on the instructions sheets.... putting only half of the washers........ this was not right... the risers were not solidly fixed ... we found out that there is some sort of bushing in the triple tree hole that is longer than the holes .. so by not using all washers the risers are moving a bit ... they are not well fixed... 2- we decided to put all washers, it was the only way we figured out to have them solidly fixed. For one risers it went ok .. but damm I stripped the thread in the second risers............... arggggh..... 3- hopelfully, my friend found in his garage , 2 bolts, the right size, the right thread and about 1/4 to 1/2 inch longer.......... We use those bolt instead + all the washers... the bolt being longer we passed the str... Review Details  17 out of 18 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 06/14/05 by Kevin Owens (wmko1) from peculiar, MO, United States, for a 2007 ultra classic 800 Intruder Volusia wrote: I love these. I had no problem installing them. There is a Left and a Right though. If your bars look crooked after install, you have them backwards. Make sure you cover your tank when installing. Review Details  8 out of 8 members found this review helpful. Was this review helpful to you? Yes No

(1 stars) reviewed on 06/11/05 by Lucy (Volusia2) from , ON, Canada, for a 2001 800 Intruder Volusia wrote: June/05 installed. . September/05 WARNING !!!..... One bolt fell out of the riser ... stripped the inside of the riser. Luckily I had just stopped after a long ride to change my sunglasses. I must say I'm not sure if the brand name was "Big Bike Parts" but they look alike. Will have to ask the dealer that installed them. Very scary! Turned out these risers were never meant to be installed on the Suzuki Volusia ... it was a MISPRINT!!! Our dealer replaced them with another make at no charge. Review Details  13 out of 14 members found this review helpful. Was this review helpful to you? Yes No

(5 stars) reviewed on 06/07/05 by gary davies (garydavies) from blackburn england, , Americas, for a 2004 800 Intruder Volusia wrote: hopfull gives a better ride positon Review Details  1 out of 2 members found this review helpful. Was this review helpful to you? Yes No

(4 stars) reviewed on 05/15/05 by Ron Pearce (ron57) from Brampton, ON, Canada, for a 2002 800 Intruder Volusia wrote: they look great let me ride in a better posesion Review Details  Was this review helpful to you? Yes No

(3 stars) reviewed on 03/30/05 by Mick (thebutlers845) from Prospect, PA, United States, for a 2004 800 Intruder Volusia wrote: My Back and arms feel so much better. I can sit up straiter and bend my elbows comfortably. I used these for about a year. I had to take them off to do something, when I put them back on they stripped out. They are cheap, crappy brass, and stripp easily. Review Details  4 out of 4 members found this review helpful. Was this review helpful to you? Yes No

(3 stars) reviewed on 03/24/05 by doris Hammett (doris) from regina, SK, Canada, for a 2004 800 Intruder Volusia wrote: Not on the bic. Yet Review Details  Was this review helpful to you? Yes No

(1 stars) reviewed on 03/24/05 by Mark Morgan (GrayWolf1968) from Mims, FL, United States, for a 2004 800 Intruder Volusia wrote: Threads failed when I tighten them down. Major run around getting replacement from place i ordered it from and from Big Bike Parts the maker of Show Chrome. Bolts are to long. Review Details  5 out of 6 members found this review helpful. Was this review helpful to you? Yes No

(1 stars) reviewed on 02/15/05 by vattell cooke (vattellc) from LaFeria, TX, United States, for a 2010 800 Intruder Volusia wrote: this is the worst item i have ever spent my money on. the bolts were too long and could not get them to tighten down at all. I had to remove them and I plan on taking them to a machine shop to have them rethreaded and put a stronger sleeve into the bottom..I can't trust these risers with nothing more than a weak bolt going through the center of them. The design would be alot better if the bolt came from the top downward...save your money and get something else... Review Details  8 out of 8 members found this review helpful. Was this review helpful to you? Yes No